Browse Items (23 total)

RG1D_2B_001.tif
Robotic arms have cut a fuel rod assembly and the assembly is being removed and the fuel goes to processing.

RG1D_2B_004.tif
Picture of a Jerry Tallent loading fuel pellets using a glove box while two other workers observe.

RG1D_2B_005.tif
Jerry Tallent posing with fuel driver assembly for a photographer proof

RG1D_2B_006.tif
Jerry Tallent and two other workers running a FFTF fuel driver assembly Dismantling machine.

RG1D_2B_007.tif
Group viewing the Dismantling machine through a six-foot wall and glass. The wall was lined with lead BB's to block radiation emitted from plutonium. Jerry Tallent on left.

RG1D_2B_008a.tif
From left to right: Dawson, W.F. Walker, Pete Titzler, and Jerry Tallent at the far right.

RG1D_2B_008b.tif
From left to right: Dawson, W.F. Walker, Pete Titzler, and Jerry Tallent at the far right.

RG1D_2B_009.tif
The robotic arm cuts the outside of the assembly and exposes the fuel rods.

RG1D_2B_014.tif
A steel arm used in the fuel rod Dismantling machine.

RG1D_2B_015.tif
A group of visiting foreign nuclear scientists and policymakers viewing the Dismantling machine at the Hanford Engineering Development Lab. The dismanteler, developed by Jerry Tallent, cut open fuel rods by welding copper to stainless steel which…

RG1D_2B_016.tif
Jerry Tallent operating the SN005, a fuel rod Dismantling machine that he help invent.

RG1D_2B_017.tif
"Greg" demonstrating operation of a glove box assisted by a lift while Jerry Tallent operates lift at the Hanford Engineering Development Lab.

RG1D_2B_018.tif
Jerry Tallent posing as an operator of the Dismantling machine.

RG1D_2B_019.tif
Closeup of a fuel pin canister showing hexigonal fuel rod formation.

RG1D_2B_020.tif
Manipulator arm taking apart a fuel rod.

RG1D_2B_002.tif
Functional profiles of the ODEX I, a remote observation robot built to observe dangeriously radioactive areas.

RG1D_2B_003.tif
ODEX I was built for remote observation of dangeriously radioactive areas, specifically Three Mile Island. According to Jerry Tallent the prototype was not very funcational and although another was requested it was not built.

RG1D_2B_012.tif
Business card for Charles C. Boggs, Western Regional Sales Manager for Odetics inc., a robotics company

RG1D_2B_021.tif
A certification that Jerry Tallent is qualified to operate a MULTIPAK 601 Anvil Press and a MULTIPAK 1602 3 Mode Press.

RG1D_2B_022.tif
A Certificate of Merit presented to Jerry Tallent for his work on the Dismantling Machine Design Team.

RG1D_2B_010.tif
A relation to Jerry Tallent

RG1D_2B_011.tif

RG1D_2B_013.tif
A steel arm used in the fuel rod Dismantling machine.
Output Formats

atom, dc-rdf, dcmes-xml, json, omeka-json, omeka-xml, rss2